Hawk Creation Para Board – 1 to 6 Parallel Charge Adaptor XT-60 Pro V2

With Fuse Protect & can series 1 by 1

Para Board able to let your single output charger charge up to 6 same kind of batteries at the same time.

Support 6 group 2S, or 6 groups 3S, or 6 groups 4S, or 6 groups 5S, 6S or six groups of parallel balance charging.

[Detail]
A. Balanced output line using 20AWG multi-strand silicone wire.

B. Main input line using 12AWG +4 mm gold plug one-piece high-quality multi-strand silicone wire.

C. Original Amass XT-60 

D. Thicker copper PCB to allow safe passage 30A of charge current(We did test with PL6 & PL8 at 40A, lightly warm)

E. Safty Fuse added. Additional 4mm plug & balance plug on end side to let you parallel another Para Board!!

This product is used for simultaneously charging multiple lithium batteries(including LiPo, LiFe, and Li-ion types) in parallel.
 

Main Features:
1.Convenient to charge and balance up to six lithium batteries at the same time when used with a balance charger.
The capacity, discharge rate, and voltage of batteries can be different in a reasonable range.

2.When compared to charge a single battery, this method can achieve a better balance result, and the voltage difference is smaller.
The charging time is significantly reduced since all batteries are balanced at the same time instead of balancing batteries one by one.

3.This method can significantly accelerate battery charging speed.
Taking six 2.2 Ah LiPo batteries as an example, if the pack is charged one by one at 1C rate (2.2A),
typically it will take around six hours.
When using the parallel charging board to charge all the packs at the same time,
the charge rate can be set to 13.2 A (2.2x6=13.2A),
and it will take only one hour for the packs to be fully charged and balanced.
The charge rate of every individual is still 2.2A (13.2/6 = 2.2A), therefore there is no harm to the safety and longevity of every batteries.

4.The product is made of high quality parts and built with fine workmanship.
All the metal parts of power connectors are plated with 7u gold,
and all the cables are made of soft silicon wires. The product, from PCB to circuit,
has been tested in various unfriendly environment  to ensure quality and reliability.